XTAR WP2H Two Slot Intelligent Li-ion LiFePO4 Battery Charger USB Power Bank

The XTAR WP2H Charger is our newest charger based on the VP2 and WP2 II charger. It supports LiFePO4 batteries as well as all of the most popular lithium-ions. This charger was created as an affordable, newer version of our WP2 series and as a step from the VP2. The WP2H charger can be seen as a VP2 without the LCD screen. It shares all the common features and capabilities of our XTAR VP2 but at a fraction of the cost.

• Suitable for 10440/16340/14500/14650//17670/18350/18500/18650/18700/22650/25500/26650 Li-ion Batteries also support LiFePO4 batteries.
• 0.25A/0.5A/1.0A Optional charging current, charging two batteries independently, will not affect each other. (This means slot 1 can be 1.0A and slot 2 can also run at 1.0A)
• 3.2V/3.6V/3.8V Optional charging voltage (3.2V is for LiFePO4 batteries and 3.6V/3.8V for li-ion batteries)
• Real time detection of batteries ensure safety.
• Can charge over discharged batteries.
• With 5V/1A USB output function, regard your charger as powerbank.
• Intelligent power management reduce heat and save energy.
• Reverse-polarity / short circuit protection. (In the event that batteries are inserted incorrectly, the charger is able detect this and help with damage prevention)
• Can use TC charging algorithm to activate over-discharged batteries
• Use real CC/CV charging algorithm, best for Li-ion batteries
• Precision cut-off voltage to make sure the batteries are fully charged but not over-charged
• Two channels are totally independent; one battery will not affect the other
• USB output function; the WPH2 could be used as a power bank for your mobile devices.