MTM Hydro Magnum 28 Foam Cannon Kit With Extra Orifice And Filters

This MTM Hydro Magnum 28 Foam Kit, which includes filters and extra nozzle, is exclusive to MTMParts.com.

The Magnum 28 Foam Kit will now include a 1.1mm/3.0 orifice, along with the pre-installed 1.25mm/3.5 orifice.

With the All-New MTM Hydro Magnum 28 Gun & Foam Kit, getting dirty never looked this good! Eliminate the risk of swirl marks when you apply thick foam onto your vehicle, truck, boat, house, or restaurant grill & hood. 

Included with this kit is our new SGS28 spray gun. With its built-in stainless steel swivel, you can maneuver much easier, eliminate the hassle of tangled hose, and keep your hose from flopping around and slamming against your vehicle.

Also included is our newly designed PF22. Both its adjustable nozzle and intake knob have been engineered with oversized beveling for an easier grip. In addition, the adjustable spray nozzle can now be rotated to spray either horizontally or vertically (an industry 1st), allowing you to spray down your vehicle from all angles. 

**NOTE** Foam Cannons do not operate on Pressure Washers that have Flow-Sensing unloaders. Typically, you will have pulsing foam indicating pressure spikes and drops which the flow-sensing unloaders cannot accommodate.

• SGS28 spray gun with a builtin stainless steel swivel
• PF22 (Patented) Foam Cannon with 1/4″ plug, tube, bottle, and 1.25mm/3.5 orifice installed
• Stainless steel quick connect fittings, plus a brass M22 adapter 1.1mm/3.0 orifice Now Included
• Two stainless steel replacement filters Now Included
• Roll of teflon tape
• Min. 1,100 psi – Max. 4,000 psi
• Min. 1.8 gpm – Max. 5.3 gpm
• Max. 140°F